Homeowners who regularly mow the lawn will need to maintain the lawn mower parts for the best results. Blades get dull over time and when the edge is gone, the grass is in danger of being damaged instead of getting a clean, healthy cut. With the proper instructions and a few ordinary tools, anyone is capable of sharpening the cutting surface.
There are a handful of tools and a couple safety items that must be gathered before this type of work can be done.
* Safety glasses
* When working with tools, a thick pair of work gloves will keep the hands protected and aid in gripping the handle.
* Spraying the bolts with WD-40 will help loosen them up and make them easier to remove.
* a grinder (also a vice grip if you are using a file or angle grinder instead of a bench grinder)
* a ratchet and socket set
* A spark plug wrench is used to remove the spark plug for safety.
* A scraper is needed to get rid of dirt on the cutting surface.
* It is necessary to secure the mower blade with a vice grip or C-clamp before attempting to sharpen or clean it.
The first thing you want to do is to take out your lawn mower's spark plug to ensure your engine doesn't accidentally start while you're taking off the blade. Since you're going to be tipping your lawn mower, you should also take off the air filter and remove the fuel cap. With the fuel cap off, place a plastic lining over the fuel hole, then replace the cap and make sure it's tight. This way your fuel won't leak out of the tank. Don't forget to get rid of the plastic when you're finished.
To gain easy access to the part, tilt the mower up until it is exposed. The machine should not be turned all the way over or oil may leak into the cylinder. Squirt some WD-40 on the bolts to loosen them up and make them easier to remove. When removing the bolts, it is crucial to remember the proper placement for them so they can be replaced in the right location.
After the part is removed, clear away any debris that may be stuck to it and wipe off the grime. This step will make the sharpening process easier. A clean blade is less likely to develop rust and will last longer.
Using a bench grinder is the safest way to do this job. The part will be held firmly in place to reduce the risk of suffering an injury. If a bench grinder is not available, use a vise or clamp attached to a table to hold the part in place. Make sure all grinding is being done on the side of the blade nearest the engine. The side facing the grass should not be sharpened. Look for the bevel to identify the side facing the motor.
Anyone who takes the right precautions is capable of doing this type of maintenance. Proper maintenance of lawn mower parts will ensure the grass is cut correctly and the machine will last a long time.
There are a handful of tools and a couple safety items that must be gathered before this type of work can be done.
* Safety glasses
* When working with tools, a thick pair of work gloves will keep the hands protected and aid in gripping the handle.
* Spraying the bolts with WD-40 will help loosen them up and make them easier to remove.
* a grinder (also a vice grip if you are using a file or angle grinder instead of a bench grinder)
* a ratchet and socket set
* A spark plug wrench is used to remove the spark plug for safety.
* A scraper is needed to get rid of dirt on the cutting surface.
* It is necessary to secure the mower blade with a vice grip or C-clamp before attempting to sharpen or clean it.
The first thing you want to do is to take out your lawn mower's spark plug to ensure your engine doesn't accidentally start while you're taking off the blade. Since you're going to be tipping your lawn mower, you should also take off the air filter and remove the fuel cap. With the fuel cap off, place a plastic lining over the fuel hole, then replace the cap and make sure it's tight. This way your fuel won't leak out of the tank. Don't forget to get rid of the plastic when you're finished.
To gain easy access to the part, tilt the mower up until it is exposed. The machine should not be turned all the way over or oil may leak into the cylinder. Squirt some WD-40 on the bolts to loosen them up and make them easier to remove. When removing the bolts, it is crucial to remember the proper placement for them so they can be replaced in the right location.
After the part is removed, clear away any debris that may be stuck to it and wipe off the grime. This step will make the sharpening process easier. A clean blade is less likely to develop rust and will last longer.
Using a bench grinder is the safest way to do this job. The part will be held firmly in place to reduce the risk of suffering an injury. If a bench grinder is not available, use a vise or clamp attached to a table to hold the part in place. Make sure all grinding is being done on the side of the blade nearest the engine. The side facing the grass should not be sharpened. Look for the bevel to identify the side facing the motor.
Anyone who takes the right precautions is capable of doing this type of maintenance. Proper maintenance of lawn mower parts will ensure the grass is cut correctly and the machine will last a long time.
About the Author:
Discover all the lawn mower parts you need by heading to LawnEq.com. There are several types of riding mower parts you will find at great prices. Head online now for your needs.
